LOCTITE® EPOXY METAL / CONCRETE SYRINGE
0.85 fl oz (each), 1919325, 1405605
Loctite Epoxy Metal/Concrete is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high strength bond in 5 to 12 minutes. It is used as an adhesive for repairing, filling and rebuilding all metal and concrete surfaces. Loctite Epoxy Metal / Concrete does not conduct electricity which is ideal for sealing electrical components. It cures to a metallic gray finish and can be easily sanded or machined. It does not shrink and is resistant to water and most common solvents.
|High impact resistance||Will not crack when drilled|
|Water resistant||Great for interior or exterior projects|
|Will not shrink||One-time application|
|Convenient double syringe||Dispenses equal amounts of each component every time|
|Will not conduct electricity||Can be used for sealing electrical components|
|Sets in 5 to 12 minutes||Quick completion of project|
- Repairing machinery, appliances, tools, lawnmowers, automotive components, pipes, embedding bolts and screws into metals, concrete or stone and sealing electrical components against moisture and vibration
- Bonding metal and concrete as well as glass, ceramic and wood
Not Recommended For:
- Continuously wet areas or water immersion.
- Polyethylene, polypropylene, Nylon™, Teflon™ or flexible materials.
- Applying at temperatures below 39°F (4°C) and above 95°F (35°C).
Directions For Best Results:
Apply and cure in a well ventilated area. Wear gloves and wash hands after use.
Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion. Pre-fit parts to be joined. Remove the plug from between the piston. Cut off the end tips of the syringe. Turn syringe end up and pull plunger back slightly allowing air bubbles to rise to top. Depress the double piston to dispense equal parts of the two materials on a disposable surface. Mix resin and hardener thoroughly until uniform in color. Wipe syringe tips clean, retract piston slightly and close with the plug. Ensure that the plug is always placed in the same orientation on the tips.
Apply a small amount to both surfaces, join and press together. Remove any excess glue immediately with acetone. Support until bond sets in 5 to 12 minutes at room temperature. Usable strength in 12 hours. Full cure and strength in 24 hours.
Clean excess glue immediately with acetone before adhesive sets. Cured adhesive may be cut away with caution using a sharp blade. Prolonged immersion in paint stripper will soften the cured adhesive to aid removal. Use an approved hazardous waste facility for disposal.
Technical Data Sheet – TDS
Material Safety Data Sheet – SDS
For over 50 years, Loctite® has provided customers with advanced adhesive and sealing solutions. Our ongoing commitment to innovation insures continued development of breakthrough formulations and frustration-free dispensing systems. With over 5,000 patents, Loctite leads the category and offers the broadest line of premium quality acrylics, anaerobics, cyanoacrylates, epoxies, aerosols, silicones and urethanes. Our product portfolio features the product depth to address specific situations and the breadth to address most every bonding and sealing application.
The Loctite brand is a registered trademark of Henkel, and is one of its largest global brands. For more than 130 years, Henkel, a Fortune Global 500 company, has been committed to making people's lives easier, better and more beautiful. Henkel offers strong brands and technologies in more than 125 countries, and in three areas of competence: Home Care, Personal Care and Adhesive Technologies.
In North America, Henkel markets a wide range of well-known consumer and industrial brands, including Loctite® adhesives, OSI® adhesives and sealants, Lepage® adhesives and sealants, Dial® soaps, Purex® laundry detergents, Right Guard® antiperspirants and got2b® hair gels.