LOCTITE® REPAIR PUTTY ALL‐PURPOSE – X Pack
2.0 fl oz (each), 1999131
KNEAD, APPLY, READY
Loctite Repair Putty All-Purpose is a hand-mixable and fast-setting two-part adhesive consisting of an epoxy resin putty and a hardener putty perfect for small or emergency repairs. The two parts react to produce a hard, tough, permanent and waterproof bond on a wide range of materials. The modeling clay consistency allows it to be shaped and formed as desired before curing begins. Loctite Repair Putty All-Purpose does not shrink and is resistant to most common solvents. It can bond to damp surfaces, cure under water and can be sanded, drilled and painted after 60 minutes. Loctite Repair Rutty All-Purpose will rebuild and bind to create a waterproof seal that is potable water safe as certified by NSF®.
Color-Dry: Bluish White
Features and Benefits:
- Easy to Use – Knead, Apply, Ready
- Paintable & Sandable
- Quick Drying Time
- Certified to NSF/ANSI 61
|Knead, Apply, Ready||Easy to Use|
|Waterproof||Indoor and outdoor use|
|Paintable & Sandable||Blends with surroundings|
|Quick Drying Time||Quick completion of project|
- Plumbing, tubs & showers, pipes, potable water tanks, fiberglass, marine & pool
- Ceramic, PVC, aluminum, wood, brick, metal, concrete, rigid and semi-flexible plastic
Not Recommended For:
- Polyethylene, polypropylene, non-stick coatings, nylon products or flexible materials
- Large and deep holes
- Applications above 250°F (121°C) for fills or applications greater than 158°F (70°C) for load bearing bonds
- Structural applications
- Repairs subject to movement
Directions For Best Results:
Wear gloves and wash hands after use.
Surfaces should be clean, dry and free from grease, dust and oil. For better adhesion, slightly roughen the surface with a wire brush or sandpaper prior to cleaning. Cut off desired amount of Repair Putty and knead until uniform color is obtained (approximately 1 minute).
Apply the putty to surface to be repaired within 3 minutes of mixing. Work putty firmly into the crack or hole and shape/smooth with hands. For bonding, place the putty between the surfaces and apply firm pressure to ensure intimate contact with both surfaces. If applying to a wet surface, apply forcefully and hold in place for 3-5 minutes until adhesion takes effect. For a smooth finish, rub the putty with a damp cloth prior to hardening. Working time is approximately 3-5 minutes. After 15-60 minutes, the putty can be sanded, drilled or painted. For best results: Use damp fingers for easier mixing, application and to achieve a smooth appearance of the cured putty. Remove excess material before hardening begins.
Cured and uncured putty may be cut away with caution using a sharp blade.
Technical Data Sheet – TDS
Material Safety Data Sheet – SDS
For over 50 years, Loctite® has provided customers with advanced adhesive and sealing solutions. Our ongoing commitment to innovation insures continued development of breakthrough formulations and frustration-free dispensing systems. With over 5,000 patents, Loctite leads the category and offers the broadest line of premium quality acrylics, anaerobics, cyanoacrylates, epoxies, aerosols, silicones and urethanes. Our product portfolio features the product depth to address specific situations and the breadth to address most every bonding and sealing application.
The Loctite brand is a registered trademark of Henkel, and is one of its largest global brands. For more than 130 years, Henkel, a Fortune Global 500 company, has been committed to making people's lives easier, better and more beautiful. Henkel offers strong brands and technologies in more than 125 countries, and in three areas of competence: Home Care, Personal Care and Adhesive Technologies.
In North America, Henkel markets a wide range of well-known consumer and industrial brands, including Loctite® adhesives, OSI® adhesives and sealants, Lepage® adhesives and sealants, Dial® soaps, Purex® laundry detergents, Right Guard® antiperspirants and got2b® hair gels.