LOCTITE® EPOXY MARINE SYRINGE
0.85 fl oz (each), 1919324, 1405604
Loctite Epoxy Marine is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 120 minutes. It can be applied and cured underwater. Ideal for repairing pipes. It cures to a white finish and can be easily sanded or machined. It does not shrink and is resistant to water and most common solvents.
|High impact resistance||Will not crack when drilled|
|Water and solvent resistant||Highly durable|
|One-time application||Will not shrink|
|Convenient double syringe||Dispenses equal amounts of each component every time|
|Apply and cure under water||Eliminates the need to drain out water before fixing|
- Surfaces exposed to water immersion
- Ideal for PVC, copper, brass and galvanized pipes
- Bonding metal, concrete, glass, fiberglass, ceramic, wood and certain rigid plastics
Not Recommended For:
- Aquariums or potable water systems
- Polyethylene, polypropylene, Nylon™, Teflon™ or flexible materials.
- Applications above 150°F (65°C).
Directions For Best Results:
Well-ventilated area, gloves.
Surfaces must be clean, dry and free from oil, wax and paint. For better adhesion, roughen smooth surfaces prior to cleaning. Pre-fit parts to be joined. Remove the plug from between the piston. Cut off the end tips of the syringe. Depress the double piston to dispense equal parts of the two materials on a discardable surface. Mix resin and hardener thoroughly until uniform in color. Wipe syringe tips clean, retract piston slightly and close with the plug. Ensure that the plug is always placed in the same orientation on the tips.
Apply a small amount to both surfaces and assemble parts together. Remove any excess glue immediately with acetone. Support parts until bond sets in 120 minutes at room temperature. Allow full cure of 24 hours before subjecting to normal use.
Clean excess glue immediately with acetone before adhesive sets. Cured adhesive may be cut away with caution using a sharp blade. Prolonged immersion in paint stripper will soften the cured adhesive to aid removal.
Technical Data Sheet – TDS
Material Safety Data Sheet – SDS
Material Safety Data Sheet 2 – SDS
For over 50 years, Loctite® has provided customers with advanced adhesive and sealing solutions. Our ongoing commitment to innovation insures continued development of breakthrough formulations and frustration-free dispensing systems. With over 5,000 patents, Loctite leads the category and offers the broadest line of premium quality acrylics, anaerobics, cyanoacrylates, epoxies, aerosols, silicones and urethanes. Our product portfolio features the product depth to address specific situations and the breadth to address most every bonding and sealing application.
The Loctite brand is a registered trademark of Henkel, and is one of its largest global brands. For more than 130 years, Henkel, a Fortune Global 500 company, has been committed to making people's lives easier, better and more beautiful. Henkel offers strong brands and technologies in more than 125 countries, and in three areas of competence: Home Care, Personal Care and Adhesive Technologies.
In North America, Henkel markets a wide range of well-known consumer and industrial brands, including Loctite® adhesives, OSI® adhesives and sealants, Lepage® adhesives and sealants, Dial® soaps, Purex® laundry detergents, Right Guard® antiperspirants and got2b® hair gels.