Henkel

LOCTITE® SPRAY ADHESIVE PROFESSIONAL PERFORMANCE (1629134)

  • Deal
  • Regular price $ 21.49
  • Will be in stock after




LOCTITE® SPRAY ADHESIVE PROFESSIONAL PERFORMANCE

13.5 oz (each), 1629134

Loctite® Spray Adhesive Professional Performance is a premium quality formulation that creates high strength and high temperature-resistant permanent bonds. It dries clean and is non-yellowing. It was developed for light and demanding applications. Ideal where support is not possible. Can be used indoors and outdoors.

Color-Dry: Clear

Feature Benefit
High temperature resistant Can be used outdoors
Dries clear and will not yellow with age Invisible bond
Can apply multiple coats Increases bond strength
Does not bubble No reworking

 

Recommended For:

  • Decorative laminate/trim work, marine applications, upholstery work, van/motor home conversions, kick plates and signage
  • Bonding wood, metal, glass, carpet and plastics (polypropylene, acrylics, PVC and more!)

Not Recommended For:

  • Combinations of high humidity and high temperature can promote bond failure.
  • Certain plastics and elastomeric substrates can exhibit bond failure due to plasticizer migration.
  • Repairing or installing car headliner fabric.
  • Unsupported vinyl fabric.

Directions For Best Results:

Safety Precautions

Well-ventilated area, wash hands after use.

Preparation

Apply adhesive between 65°F (18°C) and 95°F (35°C). Shake can well before using. Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Testing of substrates for compatibility is recommended. Repositioning is not possible. Turn spray tip so that the black dot is aligned with the nozzle.

Application

Hold can in a vertical position. Point valve towards surface and spray from a distance of 8” to 10” (20 to 25 cm). Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags. Apply an even coat to both surfaces to be bonded and allow to dry 2 to 5 minutes between coats. Apply maximum pressure over entire surface. Adhesive loses tack after approximately 10 minutes. Re-coat if time exceeded. Porous surfaces will require more than one coat.

Cleanup

After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits.

Note: When using solvents for cleanup, take and use proper precautionary measures.

Downloads

Technical Data Sheet – TDS
Material Safety Data Sheet – SDS


About Loctite

Overview

For over 50 years, Loctite® has provided customers with advanced adhesive and sealing solutions. Our ongoing commitment to innovation insures continued development of breakthrough formulations and frustration-free dispensing systems. With over 5,000 patents, Loctite leads the category and offers the broadest line of premium quality acrylics, anaerobics, cyanoacrylates, epoxies, aerosols, silicones and urethanes. Our product portfolio features the product depth to address specific situations and the breadth to address most every bonding and sealing application.

 

Loctite Logo

About Henkel®

Overview

The Loctite brand is a registered trademark of Henkel, and is one of its largest global brands. For more than 130 years, Henkel, a Fortune Global 500 company, has been committed to making people's lives easier, better and more beautiful. Henkel offers strong brands and technologies in more than 125 countries, and in three areas of competence: Home Care, Personal Care and Adhesive Technologies.

In North America, Henkel markets a wide range of well-known consumer and industrial brands, including Loctite® adhesives, OSI® adhesives and sealants, Lepage® adhesives and sealants, Dial® soaps, Purex® laundry detergents, Right Guard® antiperspirants and got2b® hair gels.

 Henkel Logo